Maybe you have felt confused when suddenly the printer you have doesn't work. How do you reset the Canon MP287 printer or how much will it cost if you have to go to a repairman. This condition certainly makes you worried, resentful or maybe disappointed. Because work cannot be completed properly and on time.
Even though there is a way that is common and usually done as a solution. But usually this step is very common for beginners, so in the end it still creates panic.
Here's how to reset the Canon MP287 Printer Error
For those of you who are beginners in using printers and then experience printer errors, you don't need to feel worried or panic when you get one. In this article, we will explain how to reset an error Canon MP287 printer.
Of course this method is a solution for printer errors, and not because of damage to the printer spare parts. Because if the spare part is damaged, it must be replaced. And here is the solution for resetting the error printer:
1. Change Printer Status to Service Mode
This step is the first safe step that must be taken. Because this step will expedite the steps to be taken when resetting the printer. Here are the steps to make the printer into service mode that you have to do:
• Turn off the printer if your printer status is currently on.
• Press the Stop/Reset Button Together with the Power Button When the Printer is Off.
• Release the pressure on the research button but keep pressing the power button
• While Pressing the Power Button, Press the Stop/Reset Button 6 times. After That Release Simultaneously.
• If the steps you did are correct, then the computer will get a new device. If the steps taken fail, the device will not appear.
2. Resetting the Printer With Software
Steps to reset the Canon MP287 printer can be done with a tool. You can easily find these tools on Google, you only need to search for the Canon MP287 resetter tools.
After you download these tools, the next step is to install the tools and extract them. Then run resetter MP287 by clicking 2 times on service tools v.3400.exe.
The steps are as follows:
• Go to Main Menu, then Click.
• Continue By Clicking the Clear Ink Counter Sub Text Tab and Click "Main" Continue Click "Set"
• Click the Ink Absorber Counter Tab Then Click "Main" And Click "Set"
• Click “EPROM”
If the steps above are done correctly, the printer will print a piece of paper. After that, turn off and turn on the printer again. If the resetter step is correct, then the printer will work normally again.
3. Research Canon printers without software
How to research the Canon MP287 printer can also be done without software. You just need to do the following steps:
• Turn off Printer
• Unplug the cable if it is still plugged into the electrical outlet
• Press the Old Printer's Power Button
• When pressing the printer's power button, plug the cable into the electrical outlet
• Still in the position of pressing the printer button, wait about 2 seconds.
Then Press the Resume Printer Button 2 times. After releasing the power button that was still pressed earlier.
• Go to Control Panel Then Look for Printer Settings. Then you will find a new printer which is usually followed by the word copy behind it.
• Change the Printer to Default
Those were the steps on how to research the Canon MP287 printer that you can do when the printer has an error.
Post a Comment